Stainless steel tanks are the most durable, longest lasting tank available on the market. The materials weigh and cost more than carbon or aluminum, but operators who want to keep their trucks in service longer insist on stainless. The stainless service module is designed to maximize the payload capacity for single and tandem rear axle trucks. This eliminates the added cost and maintenance of a lift or tag axle while maintaining a manageable overall length.
Sizes range from 2200-3200 gallons. These are large enough to pump up to three average sized septic tanks before dumping and with its open frame there is additional room for storage or jetters. Select a high quality pump package from a leading manufacturer, including NVE, Masport, Jurop, Moro or Wittig. Custom tanks are also available upon request. Just contact Steve Gunderson to find out more about SVT's custom trucks.
! WARNING: These products may contain chemicals known to the State of California to cause cancer and or/birth defects or other reproductive harm. for more information go to www.P65Warnings.ca.gov
The service module features a PTO driven vacuum system for pumping waste with a four way valve for pressure off loading and unplugging lines. Right angle gear box, woods style coupler and driveline keys help prevent drivetrain damage in the case of an overflow or pump failure. Preset fast idle control protects the pump from un-intentional over speeding, Vacuum and pressure reliefs are installed to prevent tank or pump damage. The automatic pump oiling system found on the standard pump needs no adjusting and the clear poly remote oil reservoir allows for easy viewing of the oil level to help prevent pump damage caused by oil starvation. All of this from a trusted name with local representation. Call Steve Gunderson for more details on a Satellite Vacuum Trucks vac truck.
|Standard Pumps:||Masport HXL75WV, HXL15V, HXL15WV, HXL400WV Water Cooled pump with pressure dump.|
|Standard Pump Drive:||PTO with torque overload protection.|
|Masport HXL75WV, HXL15V, HXL15WV, HXL400WV Full Line Available|
|NVE 607 or NVE 866 Air or Water Cooled Full Line Available|
|Wittig RFL 100 Air Cooled or RFL 150 Water Cooled|
|Jurop R260, PNR 84 etc. Full Line Available|
|Blowers From NVE, Robuschi, Sutorbilt, Jurop, and Moro|
|Moro M10, AC4, PM 100, Full Line Available|
|Jetters, Pressure Washers and Wash Down Pumps|
|Custom Tanks (requires extra lead time)|
|Hotshift PTO with Remote Mounted PTO Switch|
|Hydraulic Drive Systems|
|DOT safety equipment package (flag and reflector, first aid kit, fire extinguisher)|
|Hose Tray Lining (Line X Style)|
|Toilet service stations (combo tanks)|
|Multiple compartments (requires extra lead time)|
|Digital liquid level gauges|
|Aluminum or steel storage boxes|
|Additional manways & ladders|
|Hoists & full opening rear doors|
|Aluminum vacuum components|
|Remote control systems|
|Custom tank & chassis painting|
|OSHA Catwalks and handrails|
|Fleet priced chassis from Peterbilt, GM, Ford, International, Kenworth, Isuzu, Sterling, Freightliner, Volve, Mack & more.|
Volume – standard sizes range from 2200-3200 gallons with custom tanks available, Shell – 1⁄4" ASTM 5454, Two 1⁄4” Baffles, External Stiffing Rings, Lifting Lugs, Top and Rear 20” Stainless Steel Manways with Aluminum Tank Collars, Access Ladder with Non Slip Steps. Three 5” Sight Glasses in Rear Head.
Bright Finish On Shell and Hose Tray Sides.
Tank rests on chassis frame on captive plastic lumber strips. Front consists of spring loaded mounts with 5⁄8" Grade 8 bolts and lock nuts. Center mount H-style mounting bracket. Rear mounts consist of 3⁄8" and 1⁄4" brackets. Brackets are bolted with 5/8" diameter Grade 8 plated bolts, to frame and to tank with 5⁄8" bolts.
Waste – 6” Sump Style with flange reduced to 4” lever valve with male camlock fitting and cap. Optional – Full 6” with 6” valve, male camlock fitting and cap.
|Rear Inlet||4” with Riser and||Stainless Deflector||Rear Head Curb Side|
|Optional Front||3 or 4” No Riser||Flush w-Tank Bottom||Front Head Curb Side|
|Optional Rear||3 or 4” No Riser||Or Deflector||Rear Head Drivers Side|
|Waste Indicator||5" Sight Glass||Three in Rear Head||Curbside|
Full Length 31” Wide Steel Hose Trays both sides, Betts Vapor Proof LED DOT Light Package, Rear Aluminum Hose Hooks, Full Length Tank Shell Protectors above hose trays, Heavy Duty Rear Bumper with Aluminum Cover. Rear Tank Rub Rails, Rear Halogen Work Lights.
Performance compartment: Vacuum Levels
|1200 RPM||Rating (CFM)||12" HG||20” HG|
|HXL75||230||85 Seconds||141 Seconds|
|HXL400WV||400||58 Seconds||95 Seconds|
The above times are estimates for empty tank performance at sea level with the standard 400 CFM Pump
|Download Catalog:||Satellite Vacuum Trucks Product Catalog|